3D printed grizzly skull in PA12 MJF

Nylon PA12S Smooth

The material that gives a very smooth and matte surface and with material properties that are suitable for end products, design models and series production! This can be seen as a mix between PA12 Standard and PA12S Extra Smooth. For manufacturing in PA12S Smooth, a finer-grained powder is used than for PA12 Standard, which gives a smoother surface but not as shiny as PA12S Extra Smooth.
GET PRICE DIRECTLY
3D printed grizzly skull in PA12 MJF
Plastic MJF

3D printing with Nylon PA12S Smooth

PA12S Smooth has the same advantages as PA12 Standard but with a less grainy surface finish. The mechanical properties are very similar to those of PA12 Standard but the very fine-grained nylon powder used for PA12S Smooth gives a very smooth matt surface which can also be dyed black or anthracite grey which gives a very nice and complete appearance. PA12S Smooth is well suited for end products and models where a matt surface that is very smooth is desired.

 

  • Smooth and matte appearance
  • The material properties are the same as PA12 Standard
  • Well suited for models and final products
  • Can be dyed black and anthracite grey with advantage

Material data

  • As printed
  • Tensile strength: 43MPa
  • Elastic limit: N/A
  • Elongation at break: 6%
  • E-modulus: 1700MPa
  • Maximum operating temperature: 85°C
  • Infill rate: 100% solid
  • Bending strength: 60MPa
  • Flexural modulus: 1500MPa
  • Material data
  • Tensile strength:
  • Elastic limit:
  • Elongation at break:
  • E-module:
  • Maximum operating temperature
As printed
43MPa
N/A
6%
1700MPa
85°C
  • Bending strength:
  • Flexural modulus:
60MPa
1500MPa
  • Material data as printed:
  • Tensile strength: 43MPa
  • Elastic limit: N/A
  • Elongation at break: 6%
  • E-modulus: 1700MPa
  • Maximum operating temperature: 85°C
  • Infill rate: 100% solid
  • Bending strength: 60MPa
  • Flexural modulus: 1500MPa
Process data
Standard tolerance: ± 0.3% (lower limit ±0.3 mm)
Layer thickness: 0.08 mm
Minimum wall thickness: 1 mm
Minimum detail: 0.8 mm
Largest component size: 380x380x280 mm
Characteristics
Biocompatible High strength Chemical resistant Very smooth surfaces Snap-fits
Category
Architectural model Design model Prototype Series production >50 pcs. Series production <50 pcs. Final product
Colours
an image that represents having 100% infilrate when ordering 3d printing
an image that represents having 0% infilrate when ordering 3d printing
order-3d-printing-top3d