MJF PA12 Standard Economy

Nylon PA12 Standard Economy

Billigare än PA12 Standard men nästan lika bra! PA12 Standard Economy är samma material som PA12 Standard men snabbare tillverkningshastighet och lite andra printerinställningar gör att PA12 Standard Economy får något sämre materialegenskaper än PA12 Standard men till ett lägre pris. Detta material passar utmärkt till slutprodukter, för serietillverkning och prototyper.
GET PRICE DIRECTLY
MJF PA12 Standard Economy
Plastic MJF

3D printing with Nylon PA12 Standard Economy

PA12 Standard is also available as PA12 Standard Economy which is the same material as PA12 Standard but the printer settings are slightly different which results in faster and cheaper prints but with slightly lower strength. PA12 Standard Economy is very suitable for prototypes, design models and also series production and can, like PA12 Standard, be dyed black or grey.

  • Cheaper but lower strength than PA12 Standard
  • Fine grainy surface finish
  • Can be dyed in gray or black
  • Works well for most purposes and also mass production of end products

Material data

  • As printed
  • Tensile strength: 45MPa
  • Elastic limit: N/A
  • Elongation at break: 10%
  • E-modulus: 2000MPa
  • Maximum operating temperature: 95°C
  • Infill rate: 100% solid
  • Bending strength: 60MPa
  • Flexural modulus: 1728MPa
  • Material data
  • Tensile strength:
  • Elastic limit:
  • Elongation at break:
  • E-module:
  • Maximum operating temperature
As printed
45MPa
N/A
10%
2000MPa
95°C
  • Bending strength:
  • Flexural modulus:
60MPa
1728MPa
  • Material data as printed:
  • Tensile strength: 45MPa
  • Elastic limit: N/A
  • Elongation at break: 10%
  • E-modulus: 2000MPa
  • Maximum operating temperature: 95°C
  • Infill rate: 100% solid
  • Bending strength: 60MPa
  • Flexural modulus: 1728MPa
Process data
Standardtolerans: ± 0.3% (lägsta gräns ±0.3 mm)
Layer thickness: 0.08 mm
Minimum wall thickness: 1 mm
Minimum detail: 0.8 mm
Largest component size: 380x380x280 mm
Characteristics
Biocompatible Chemical resistant
Category
Design model Prototype Series production >50 pcs. Series production <50 pcs. Final product
Colours
an image that represents having 100% infilrate when ordering 3d printing
an image that represents having 0% infilrate when ordering 3d printing
order-3d-printing-top3d